The main characteristics and basic performance of UV-LED light source

UV-LED is considered to be an environmentally friendly green technology, also known as 3E technology, namely energy saving (energy), environmental protection (environment), economy (economy), is a new technology developed at the end of the twentieth century, it combines The respective advantages of UV curing technology not only have the convenience in use and operation, but also have the economic and technical advantages of UV curing technology.

Main features of UV-LED light source:

1. There is no or very little organic solvent volatilization, UV is cured by UV light source, and the UV light source does not contain mercury, which is an environmentally friendly product;

2. The UV-LED curing system does not generate heat, and the UV-LED technology can significantly reduce the heat generated during the curing process, so that people can perform UV printing on thin plastics and other materials;

3. Because the ultraviolet light emitted by the UV-LED can immediately cure the ink, this saves the drying time required by other technologies and greatly improves the production efficiency;

4. LED curing technology can also reduce the two-way dragging phenomenon in the curing process. Overall, LED curing technology not only simplifies the printing process, but also enables end users who do not have knowledge of screen printing to get the desired printing results;

5. Suitable for a variety of substrates: flexible or rigid, absorbable and non-absorbent materials;

6. Energy-saving and cost-reduction, UV light source also has many advanced functions and is environmentally friendly. Compared with traditional metal halide lamps, UV-LED light source can save 2/3 of the energy. Another important advantage of UV-LED technology is that UV-LED does not require warm-up time and can be turned on or off at any time as needed.

Model: LP-SC5001200W3-AW

Chip: 600 chips.

Irradiation head size: 550 * 150 * 103 (MM)

Effective irradiation area: 500 * 120 (MM)

Recommended irradiation height: 20-30 (MM)

Illumination:> 300mw / cm ^ 2 (365nm).

Power consumption of the whole machine: about 2500W, using liquid cooling circulation heat dissipation.