Led light with 5050 what is the meaning of 5050 light belt and 3528 light belt which is good

5050 patch is an electronic component, the size is 5mm * 5mm * 1.6mm, the light intensity can reach 5500-6000MCD (pure white light, slightly warmer light), the working voltage is the same as ordinary LED, only 3.2-3.4 V, the current is the same, 60MA.

5050led package size: 5mm * 5mm * 1.6mm, light intensity can reach 5500-6000MCD (pure white light, warm light slightly smaller). His working voltage is the same as ordinary LED, only 3.2-3.4V, the current is the same 60MA.

Because the 5050 patch led volume is relatively small, the workmanship is relatively fine, so manual soldering is not convenient, but it is not said that it can not be soldered, its soldering temperature should be controlled within 250 degrees, otherwise it will burn the more expensive 5050 patch led.

Because the 5050 patch led parameter determines that he must be a favorite led, so he is often used in high-end civilian energy-saving lamps, car dashboards, led lights, cell phone backlights and buttons, instrumentation backlights and require small-volume LEDs Products, LED backlight, switch and logo flat backlight, caller ID, flash, car, audio, indoor display, lighting market!

The higher the current, the higher the voltage, the higher the temperature, the smaller the current, the angle of illumination: 125 degrees, etc.

The forward current is 60mA, and the reverse voltage cannot exceed 5V.

The working temperature is preferably between -35 and +60 °C. If you do not consider the light decay life problem, you can also work below +85 degrees.

Power: 0.18W (same power as 0.2W on the market)

1, current: 43-46mA (this is the most ideal drive current); the maximum operating current can not exceed 60mA;

2, the voltage 2.8-3.6V (requires the instantaneous voltage of the lamp bead can not exceed 5V, or the LED lamp bead is damaged or seriously damaged and cannot be repaired);

3, the ambient temperature -20 ° C ~ +40 ° C (requires the heat dissipation design of the lamp is better done, the temperature of the LED lamp pin can not exceed 60 degrees);

4. If the current is at 14-20 mA, the brightness is reduced by 4% for each 1 mA reduction;

5. The current is 0.12W at 43-46mA, 0.15W at 46-53mA, and 0.18W at 54-60mA;

6, low power consumption

7, long service life

At the right current and voltage, LEDs can last up to 100,000 hours.

8, high brightness, low heat

Less heat radiation than HID or incandescent lamps.

9, environmental protection

LEDs are made of non-toxic materials, unlike mercury-containing fluorescent lamps that can cause contamination, and LEDs can be recycled.

10, sturdy and durable

The LED is completely encapsulated in epoxy, which is stronger than both the bulb and the fluorescent tube. There are no loose parts in the lamp body. These features make the LEDs hard to damage.

11, strong controllability

It is easy to achieve color changes and light and dark changes, and it is responsive.

The 5050 strip and the 3528 strip are actually the difference in the size of the internal bead chip. The 5050 led light strip indicates that the lamp bead chip has a length of 5.0 mm and a width of 5.0 mm. Similarly, the led light strip of 3528 indicates that the length of the lamp bead is 3.5 mm and the width is 2.8 mm.

On the number of LED chips and the luminous intensity, the 5050 lamp with the chip has 3 LED chips, and the 3528 lamp with only one LED chip, so the corresponding 5050 lamp with higher intensity than the 3528 lamp, the popular speaking That is, the 5050 strip is brighter than the 3528 strip.

Power and current strength. The 5050 lamp strip is used for 0.18W, the drive current is 60mA, and the 3528 strip has a power of 0.06W and a drive current of 20mA.

In terms of spectral brightness, the 5050 lamp strip uses 3 lamp beads, and its splitting brightness is larger than that of the 3528 strip. In terms of numerical value, the 5050 strip has a spectral brightness of 4500-5500-6500, while the 3528 lamp The spectral intensity of the belt is 2000-2400-2800.

The single lamp lumens have different values. The difference in power also makes the lumens of the two lamps different. The lumen value of the 5050 led strip is 15LM and 18LM, while the single lamp lumen of the 3528led strip is 7LM.

In general, the 5050 lamp strip was developed on the basis of the 3528 lamp strip. In terms of performance, the 5050 strip has better performance than the 3528 strip, and the brightness is higher, but the complicated production will inevitably bring higher Price, the price of 5050 light strips on the market is generally higher than the price of 3528 light strips. Users should purchase according to their own home decoration and actual economic ability when choosing. For example, the light strips decorated on the ceiling should be better selected with a 5050 light strip with a higher brightness. If it is a small area such as a bathroom that does not require a good brightness, then the 3528 LED strip can also be used. Very good decorative effect, and the price can be much cheaper.

WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349